Showing posts with label v3. Show all posts

Friday, July 29, 2016

Guide Flash Update Firmware Samsung GALAXY S7 EDGE SM G935F Using ODIN v3 11 1

[Guide] Flash / Update Firmware Samsung GALAXY S7 EDGE SM-G935F Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F. This guide show you how to flash a stock ROM on Samsung GALAXY S7 EDGE SM-G935F using Odin V3.11.1 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2016, March. and available on USA, Global and Southeast Asia. Samsung GALAXY S7 EDGE SM-G935F is the smartphone with 5,1 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v6.0 (Marshmallow), with Quad-core 1.8 GHz CDual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4 GB of RAM and 12 MP of Main camera and 5 MP on secondary camera.

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY S7 EDGE SM-G935F android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY S7 EDGE SM-G935F variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY S7 EDGE SM-G935F. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY S7 EDGE SM-G935F

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

Make sure your Samsung GALAXY S7 EDGE SM-G935F battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
Make sure you have installed a Latest of Driver Samsung that support with your Smartphone, If you dont have, please download here
Original USB cable driver for your Samsung GALAXY S7 EDGE SM-G935F
Download Samsung Smart Switch, Here
Download Odin V3.11.1, Here
Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY S7 EDGE SM-G935F

You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
Then you must install all driver or samsung smart switch to your computer or PC.
Extraxt Odin V3.11.1. file on the destination folder.
To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
sammobile website Log In
On the row menu at the top of page, you can select firmware.
sammobile website GALAXY S7 EDGE SM-G935F
Then you must enter in search bar with your phone model number.
Firmware Samsung GALAXY S7 EDGE SM-G935F
Then select your country/carrier.
select country or carrier for samsung firmware
Then you click on available country link.
For Non-Premium member you can Select regular download.
sammobile download non premium member
And Donwload button again. Approximately file size is 1,9 GB
Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
This is your file.
Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
Switch Off your Samsung GALAXY S7 EDGE SM-G935F to start flashing process.
Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
Now your firmware file has been inserted in Odin3
Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
Then, Enter download mode your Samsung GALAXY S7 EDGE SM-G935F by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
download mode Samsung GALAXY S7 EDGE SM-G935F
And you will see picture like this on your LCD screen.

Download Mode GALAXY S7 EDGE SM-G935F

On this mode, now you must connect your Samsung GALAXY S7 EDGE SM-G935F to your PC / laptop using a USB cable.
After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
Port Com samsung GALAXY S7 EDGE SM-G935F
Make sure re-partition is NOT ticked
When everything already you can click Start Button. at the bottom left corner
Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
When complete it will display a notification PASS and your smartphone Samsung GALAXY S7 EDGE SM-G935F will automatically restart.
Wait your device to boot up, it will take a while.
When your Samsung GALAXY S7 EDGE SM-G935F is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
dial pad samsung GALAXY S7 EDGE SM-G935F
And you will see your new firmware version.
firmware version samsung GALAXY S7 EDGE SM-G935F
Finish.

Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your Samsung GALAXY S7 EDGE SM-G935F device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the Samsung GALAXY S7 EDGE SM-G935F devices warranty.

Get

Ccit Teb A320W A22 MB V3 4 100 Tested Latest Updat Flash File Android 4 2 2 By Sumonbd

Get

Guide Flash Update Firmware Samsung GALAXY S7 SM G930F Using ODIN v3 11 1

[Guide] Flash / Update Firmware Samsung GALAXY S7 SM-G930F Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY S7 SM-G930F. This guide show you how to flash a stock ROM on Samsung GALAXY S7 SM-G930F using Odin V3.11.1 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2016, February. and available on USA, Global and Southeast Asia. Samsung GALAXY S7 SM-G930F is the smartphone with 5,1 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v6.0 (Marshmallow), with Quad-core 1.8 GHz CDual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4 GB of RAM and 12 MP of Main camera and 5 MP on secondary camera.

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY S7 SM-G930F android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY S7 SM-G930F variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY S7 SM-G930F. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY S7 SM-G930F

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

Make sure your Samsung GALAXY S7 SM-G930F battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
Make sure you have installed a Latest of Driver Samsung that support with your Smartphone, If you dont have, please download here
Original USB cable driver for your Samsung GALAXY S7 SM-G930F
Download Samsung Smart Switch, Here
Download Odin V3.11.1, Here
Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY S7 SM-G930F

You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
Then you must install all driver or samsung smart switch to your computer or PC.
Extraxt Odin V3.11.1. file on the destination folder.
To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
sammobile website Log In
On the row menu at the top of page, you can select firmware.
sammobile website GALAXY S7 SM-G930F
Then you must enter in search bar with your phone model number.
Firmware Samsung GALAXY S7 SM-G930F
Then select your country/carrier.
select country or carrier for samsung firmware
Then you click on available country link.
For Non-Premium member you can Select regular download.
sammobile download non premium member
And Donwload button again. Approximately file size is 1,5 GB
Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
This is your file.
Flash Stock Firmware On Samsung GALAXY S7 SM-G930F
Switch Off your Samsung GALAXY S7 SM-G930F to start flashing process.
Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung GALAXY S7 SM-G930F
When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Firmware On Samsung GALAXY S7 SM-G930F
Now your firmware file has been inserted in Odin3
Flash Stock Firmware On Samsung GALAXY S7 SM-G930F
Then, Enter download mode your Samsung GALAXY S7 SM-G930F by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
download mode Samsung GALAXY S7 SM-G930F
And you will see picture like this on your LCD screen.

Download Mode GALAXY S7 SM-G930F

On this mode, now you must connect your Samsung GALAXY S7 SM-G930F to your PC / laptop using a USB cable.
After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
Port Com samsung GALAXY S7 SM-G930F
Make sure re-partition is NOT ticked
When everything already you can click Start Button. at the bottom left corner
Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
When complete it will display a notification PASS and your smartphone Samsung GALAXY S7 SM-G930F will automatically restart.
Wait your device to boot up, it will take a while.
When your Samsung GALAXY S7 SM-G930F is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
dial pad samsung GALAXY S7 SM-G930F
And you will see your new firmware version.
firmware version samsung GALAXY S7 SM-G930F
Finish.

Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your Samsung GALAXY S7 SM-G930F device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the Samsung GALAXY S7 SM-G930F devices warranty.

Get

Galaxy tab 5 k0712b v3 2 MT6572 4 2 2 Official firmware 1000 tested

Get

How to Install Android 6 0 1 Marshmallow Amaluna V3 5 0 ROM on Xperia Z3 D6603 Full Deodexed

According to XDA member pandemic, Android 6.0.1 Marshmallow Amaluna V3.5.0 ROM is released for Sony Xperia Z3 D6603.

÷ Features:Based on latest FW .151
Full deodexed
TWRP 3.0.2
SuperSU 2.71
Superuser mod
[Patched Services.jar]
Xperia X files like:
Settings
[MW Modules Included]
SystemUI Includes:
Small apps removed by Sony
No more Google search bar on top of Recent list.
Swipe left or up to unlock
New battery icon
New transparent lockscreen on both Digital clock.
New Clear All look
New layout design
You can also open Quick settings by swiping down
from the top to center of the screen
See Through Clock" for all lockscreen wallpapers.
and more..

÷ ROM info:
Contributors:
Pandemic
ROM OS Version: 6.0.1
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock
Based On: Stock
Version Information
Status: Very Stable
Current Stable Version: V3.5.0
Stable Release Date: 2016-04-23
Created: 2016-04-23
Last Updated: 2016-05-25.

÷ Prerequisites:

This tutorial is only for installing Android 6.0.1 Amaluna V3.5.0 ROM on Sony Xperia Z3. Please do not try on any other Xperia Z3 variants.

•Your phone should be rooted and have ClockworkMod recovery installed from before.

•This tutorial will wipe out all your data. Proceed at your own risk.

•Perform a Dalvik Cache wipe before proceeding from the recovery mode.

•Sony PC Companion will NOT detect your phone after installing this ROM because it is a custom firmware.

•Bootloader should be unlocked or you will not be able to install this ROM.

•Make sure you backup all your data in your phone before proceeding.

View my Flipboard Magazine.

*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

ROM Download & Installation Instructions via: XDA.

For More Sony Xperia Z3 latest updates Keep Checking Android Custom ROM Fix ™®

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Latest Updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

Get

info

Brand : TY0712-3G-HD-2

ProdName : ty702_jty_hspa

ProdModel : TY0712-3G-HD-2

Device : ty702_jty_hspa

AndroidVer: 4.2.2

MTKxCPU : MT6572

MTKxPRJ : ALPS.JB3.MP.V1.10

[Read Ok] : preloader_ty702_jty_hspa.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / ty702_jty_hspa / EMMC

FW Size : 678 MiB

Official

Bin

Get

Guide Flash Update Firmware Samsung GALAXY A9 SM A9000 Using ODIN v3 11 1

[Guide] Flash / Update Firmware Samsung GALAXY A9 SM-A9000 Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY A9 SM-A9000. This guide show you how to flash a stock ROM on Samsung GALAXY A9 SM-A9000 using Odin V3.10.7 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2015, December. and available worldwide. Samsung GALAXY A9 SM-A9000 is the smartphone with 6,0 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v5.1.1 (Lollipop), planned upgrade to v6.0 (Marshmallow), with Quad-core 1.8 GHz Cortex-A72 & quad-core 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8976 Snapdragon 652 chipset, Adreno 510 GPU, combined with 3 GB of RAM and 13 MP of Main camera and 8 MP on secondary camera.

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY A9 SM-A9000 android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY A9 SM-A9000 variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY A9 SM-A9000. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY A9 SM-A9000

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

Make sure your Samsung GALAXY A9 SM-A9000 battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
Make sure you have installed a Latest of Driver Samsung that support with your Smartphone, If you dont have, please download here
Original USB cable driver for your Samsung GALAXY A9 SM-A9000
Download Samsung Smart Switch, Here
Download Odin V3.11.1, Here
Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY A9 SM-A9000

You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
Then you must install all driver or samsung smart switch to your computer or PC.
Extraxt Odin V3.10.7. file on the destination folder.
To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
sammobile website Log In
On the row menu at the top of page, you can select firmware.
sammobile website GALAXY A9 SM-A9000
Then you must enter in search bar with your phone model number.
Firmware Samsung GALAXY A9 SM-A9000
Then select your country/carrier.
select country or carrier for samsung firmware
Then you click on available country link.
For Non-Premium member you can Select regular download.
sammobile download non premium member
And Donwload button again. Approximately file size is 1,5 GB
Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
This is your file.
Flash Stock Firmware On Samsung GALAXY A9 SM-A9000
Switch Off your Samsung GALAXY A9 SM-A9000 to start flashing process.
Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung GALAXY A9 SM-A9000
When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Firmware On Samsung GALAXY A9 SM-A9000
Now your firmware file has been inserted in Odin3
Flash Stock Firmware On Samsung GALAXY A9 SM-A9000
Then, Enter download mode your Samsung GALAXY A9 SM-A9000 by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
download mode Samsung GALAXY A9 SM-A9000
And you will see picture like this on your LCD screen.

Download Mode GALAXY A9 SM-A9000

On this mode, now you must connect your Samsung GALAXY A9 SM-A9000 to your PC / laptop using a USB cable.
After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
Port Com samsung GALAXY A9 SM-A9000
Make sure re-partition is NOT ticked
When everything already you can click Start Button. at the bottom left corner
Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
When complete it will display a notification PASS and your smartphone Samsung GALAXY A9 SM-A9000 will automatically restart.
Wait your device to boot up, it will take a while.
When your Samsung GALAXY A9 SM-A9000 is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
dial pad samsung GALAXY A9 SM-A9000
And you will see your new firmware version.
firmware version samsung GALAXY A9 SM-A9000
Finish.

Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your Samsung GALAXY A9 SM-A9000 device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the Samsung GALAXY A9 SM-A9000 devices warranty.

Get

Tutorial Upgrade

Pages

Friday, July 29, 2016